 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SBL16xxCT, SBLF16xxCT & SBLB16xxCTSeries Vishay Semiconductors formerly General Semiconductor Dual Schottky Barrier Rectifier Reverse Voltage 30 and 40V Forward Current 16A ITO-220AB (SBLF16xxCT) 0.405 (10.27) 0.383 (9.72) 0.188 (4.77) 0.172 (4.36) 0.110 (2.80) 0.100 (2.54) 0.140 (3.56) DIA. 0.130 (3.30) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.370 (9.40) 0.360 (9.14) 0.148 (3.74) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.410 (10.41) 0.390 (9.91) 1 0.160 (4.06) 0.140 (3.56) PIN 2 3 0.603 (15.32) 0.573 (14.55) 0.560 (14.22) 0.530 (13.46) 0.055 (1.39) 0.045 (1.14) 1 TO-220AB (SBL16xxCT) 0.415 (10.54) MAX. 0.600 (15.5) 0.580 (14.5) PIN 2 3 0.131 (3.39) DIA. 0.122 (3.08) 0.676 (17.2) 0.646 (16.4) 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.060 (1.52) PIN 1 PIN 3 PIN 2 0.635 (16.13) 0.625 (15.87) 0.350 (8.89) 0.330 (8.38) 0.110 (2.80) 0.100 (2.54) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.560 (14.22) 0.530 (13.46) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.69) 0.022 (0.55) 0.014 (0.36) PIN 1 PIN 3 PIN 2 CASE 0.205 (5.20) 0.195 (4.95) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) TO-263AB (SBLB16xxCT) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN K 0.190 (4.83) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout TO-263AB 0.42 (10.66) 0.360 (9.14) 0.33 (8.38) 0.63 (17.02) 0.055 (1.40) 0.047 (1.19) 0.624 (15.85) 1 K 2 0.591 (15.00) 0-0.01 (0-0.254) 0.110 (2.79) 0.090 (2.29) 0.320 (8.13) Dimensions in inches and (millimeters) 0.08 (2.032) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) PIN 1 PIN 2 K - HEATSINK 0.021 (0.53) 0.014 (0.36) 0.140 (3.56) 0.110 (2.79) Features 0.24 (6.096) 0.12 (3.05) 0.095 (2.41) 0.205 (5.20) 0.195 (4.95) * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Dual rectifier construction, positive center tap * Metal silicon junction, majority carrier conduction * Low power loss, high efficiency * Guardring for overvoltage protection * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering guaranteed: 250C/10 seconds, 0.25" (6.35mm) from case Document Number 88727 11-Feb-02 Mechanical Data Case: JEDEC TO-220AB, ITO-220AB & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 oz., 2.24 g www.vishay.com 1 SBL16xxCT, SBLF16xxCT & SBLB16xxCTSeries Vishay Semiconductors formerly General Semiconductor Maximum Ratings Parameter (TC = 25C unless otherwise noted) Symbol VRRM VRWM VDC IF(AV) SBL1630CT 30 21 30 16 8.0 250 SBL1640CT 40 28 40 Unit V V V A Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current Total device at TC = 95C Per leg Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg Operating junction and storage temperature range RMS Isolation voltage (SBLF type only) from terminals to heatsink with t = 1.0 second, RH 30% IFSM TJ, TSTG VISOL A C V -40 to +125 4500 (NOTE 1) 3500 (NOTE 2) 1500 (NOTE 3) Electrical Characteristics (TC = 25C unless otherwise noted) Parameter Maximum instantaneous forward voltage per leg at 8.0 A (Note 4) Maximum instantaneous reverse current TC = 25C at rated DC blocking voltage per leg (Note 4) TC = 100C Symbol VF IR Value 0.55 0.5 50 Unit V mA Thermal Characteristics (TC = 25C unless otherwise noted) Parameter Typical thermal resistance from junction to case per leg Symbol RJC MBR 2.0 MBRF 4.0 MBRB 2.0 Unit C/W Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19") (4) Pulse test: 300s pulse width, 1% duty cycle www.vishay.com 2 Document Number 88727 11-Feb-02 SBL16xxCT, SBLF16xxCT & SBLB16xxCTSeries Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Forward Current Derating Curve 20 Resistive or Inductive Load 300 Maximum Non-Repetitive Peak Forward Surge Current Per Leg Peak Forward Surge Current (A) TJ = TJ max. 8.3ms Single Half Sine-Wave (JEDEC Method) Average Forward Current (A) 16 250 200 150 12 8 100 50 0 4 0 0 50 100 150 1 10 100 Case Temperature (C) Number of Cycles at 60 HZ Typical Instantaneous Forward Characteristics Per Leg TJ = 125C Pulse Width = 300s 1% Duty Cycle Typical Reverse Characteristics Per Leg IR - Instantaneous Reverse Current (mA) 50 10 TJ = 125C 1.0 75C 0.1 IF - Instantaneous Forward Current (A) 50 10 1.0 TJ = 25C 0.1 0.01 25C 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.001 0 20 40 60 80 100 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Typical Junction Capacitance Per Leg 4,000 100 Typical Transient Thermal Impedance Per Leg Transient Thermal Impedance (C/W) pF - Junction Capacitance TJ = 25C f = 1.0 MHZ Vsig = 50mVp-p 1,000 10 1 100 0.1 1 10 100 0.1 0.01 0.1 1 10 100 Reverse Voltage (V) Document Number 88727 11-Feb-02 t - Pulse Duration (sec.) www.vishay.com 3 |
Price & Availability of SBLB1630CT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |